Why LED high bay lights are becoming more and more popular, it provides an excellent cost-effective and energy-saving alternative to traditional fluorescent lighting. LED high bay lights are widely used in large spaces such as warehouses, retail spaces, department stores, manufacturing facilities, indoor parking lots, gymnasiums and gymnasiums and community centers, thanks to its own advantages.
LED high bay light features:
1. The lamp body adopts high-power LED as the light source to ensure its high thermal conductivity, small light decay, pure light color and no ghosting.
2. The use of industrial-grade aluminum and the design of the heat sink can be well combined with the electrical box, which can effectively conduct and diffuse heat, thereby reducing the temperature in the lamp body and ensuring the life of the light source and power supply.
3. The surface of the radiator is sprayed with plastic, and the structure is compact and beautiful.
4. Good color rendering, which can make the color of the real object more realistic. There are a variety of light colors to choose from, which can meet the needs of different environments, eliminate the depression caused by the high or low color temperature of traditional lamps, and improve people's work. effectiveness.
5. The energy saving effect is good, and it does not contain harmful heavy metals such as mercury and lead, which is green and environmentally friendly.
6. Long service life, which can be used for more than 50,000 hours, which greatly reduces the operating cost of consumers.
7. Intelligent induction, using microwave induction, or Bluetooth app mobile phone connection, dimmable light, timing, and more convenient to control. Combined with the microwave induction system, the LED high bay light can sense the switch by itself, which is more intelligent and convenient.
LED high bay light installation precautions:
1. First of all, check whether the LED high bay light can be used normally and whether the installation of accessories is complete.
2. When installing the LED or replacing the accessories of the high bay light, the power must be disconnected first.
3. The connection on the LED industrial and mining lamps can be fixed with wire clips by drilling holes and the connection behind the lamps to ensure its firmness.
4. The installation distance between the LED high bay light and the object needs to be more than 0.2 meters, and the installation distance from the ceiling should be kept more than 2 cm.
The lamps and lanterns cannot all be installed on the ceiling or the wall with heat source, and attention should be paid to the connection and separation of low-voltage and high-voltage electricity.
5. In the process of installing the LED in the mining lamp, it should be handled with care to prevent the lamp from being damaged.
LED high bay installation steps:
1. In the position where the LED high bay light needs to be installed, first preset the hook. It should be noted that the hook should be used together with the lifting ring. In addition, the bearing capacity of the hook should be guaranteed to be above 30Kg during installation.
2. Snap the lifting ring on the LED high bay light into the set hook, and then hoist the lamp through the lifting ring.
3. Then connect the power cord drawn from the site to the power cord of the luminaire, connect it according to the wiring principle of the luminaire, and do waterproof and insulation treatments.
4. After turning on the power supply, it is necessary to observe whether the led high bay light can work normally, and the installation can only be regarded as completed after confirming that there is no problem.
About Yaorong LED high bay light, please come here first. For more inquiries, please leave a message, we will contact you as soon as possible.