Do you still know the installation requirements of LED high bay light?
LED high bay light refers to the general term for lamps used in factories, warehouses, and high-bay production areas. In addition to various lighting lamps used in ordinary environments, there are also explosion-proof lamps and anti-corrosion lamps used in special environments. . Because the environment in which it is located has high requirements on all aspects of the high bay light, before the LED high bay light is installed, we need to understand the installation requirements of the LED high bay light. Let's take a look.
1. First of all, check whether the LED high bay light is complete or not and the accessories are complete.
2. When installing or replacing the accessories of the LED high bay light, pay attention to the power supply must be disconnected first. When connecting the power supply, pay attention to the adaptation of the input voltage and the high bay light. After the power cord is connected, be sure to do the corresponding waterproof and insulation treatment.
3. The connection on the LED industrial and mining lamps can be passed through the drill hole and the connection behind the lamp can be fixed with wire clips to ensure firmness.
4. It should be noted that the power cord of the LED industrial and mining lamps needs to be of sufficient length and should not be subjected to tension or tangential force. When installing the connection of lamps, avoid excessive pulling force, and do not knot the connection. Pay attention to distinguish the output connection, and do not confuse it with other lamps.
5. The installation position of the LED high bay light should be at least 0.2m away from the flammable materials, and the zenith to be installed should have a gap of 2 cm high. The lamps should not be installed inside the zenith or beside the wall with a heat source. , pay attention to separate low-voltage and high-voltage electrical wiring.
6. When installing the LED high bay light, care should be taken to handle it with care, and do not fall randomly, causing damage to the lamp, and implement it in strict accordance with the installation instructions required by the manufacturer.
7. After the installation is completed, the site should be inspected to see if there is any lighting dead angle. It should be ensured that the lighting of the lamps meets the requirements.
The above are the installation requirements that LED high bay light must know. If you want to know other related questions, please contact Yaorong Technology.
