LED high bay lights Installation attention to details
LED high bay lights are increasingly used in industries and other places. It needs to be fixed to the designated location during use, which involves an installation problem. So what details and matters need to be paid attention to during the installation process? Next, let Yaorong Technology ask you for an analysis.
1. Before installation, you must check the integrity of the LED high bay light and complete accessories.
2. During installation, it must be required that the installer holds a professional electrician certificate.
3. The wire on the LED industrial and mining lamp can be drilled, and the wire behind the LED industrial and mining lamp can be fixed with a clip to ensure that it is firmly fixed.
Fourth, make sure that the power cord of the LED high bay light has enough length. If it is too long, it can be put away, and it can be put out if it is not enough to solve the problem at any time.
5. Keep the distance between the product and flammable materials.
A power-on test is also required. If there are individual LED high bay lights that cannot be lit, you need to troubleshoot the circuit or the lamp itself. After ensuring that all LED high bay lights are normally lit, be sure to check whether there are flammable materials around. Isolate and ensure a safe distance before installation is complete.
Things to pay attention to when installing LED high bay lights
You can first determine the installation height of the LED high bay light. Determine the installation height according to the lighting environment. Generally, the height of the lamp should be more than 5 meters, and the wire should not be close to the shell of the high bay. If the conditions are necessary, the installation time is less than 3 meters, and protective measures must be taken.
LED high bay light wiring. The main line and the LED industrial and mining lamps are connected by flat hard copper wire, and one lamp is installed in 5 rings, which are evenly connected to the three-phase line according to the requirements of load balance! The LED industrial and mining lamp housing is connected with a PE protection wire separately. If the external power line and signal line of the LED high bay light are damaged, the power supply must be cut off first and repaired or replaced by qualified engineers and technicians;
Waterproof and low-temperature treatment for LED high bay lights. Generally choose high bay lights with waterproof function and waterproof transformers. The chip packaging of LED high bay lights is wrapped with temperature-resistant thermal insulation materials, which can work even when using LED high bay lights under harsh conditions. The power supply and lamp beads used for LED high bay lights Must be replaced and installed by professionals.
In order to meet the visual needs of different production work and the needs of lighting installation conditions, the reflector of the LED high bay light should be able to produce various wide and narrow light distributions. LED high bay lights are used in urban landscape lighting, decorative lighting and small-size backlight applications. It has entered a mature period; in the field of medium and large-size backlights and large-screen displays, it has entered a growth period of rapid development; general lighting products are about to enter a growth period of rapid development from the introduction period.
The advantages of Yaorong Technology LED High Bay Light are introduced in detail:
1. Energy saving: LED industrial and mining lamps can save energy by more than 50% than traditional incandescent lamps, which is more energy-saving.
2. Environmental protection: Traditional lamps and lanterns contain a large amount of mercury. When broken or damaged, mercury will volatilize into the atmosphere, seriously polluting the air and water resources. LED industrial and mining lamps do not contain mercury and any harmful substances, which meets environmental protection requirements.
3. Long life: up to more than 50,000 hours, which is 30 times that of ordinary bulbs, reducing costs.
4. Good heat dissipation: traditional lamps will generate a lot of heat, and the heat dissipation is not good, which will greatly affect the light decay of the lamp life. The LED high bay lamp body is die-casted with high thermal conductivity material, and the heat dissipation fin shell design , So that heat dissipation is better.
5. No stroboscopic: traditional lamps use alternating current, so 100-120 stroboscopic times per second will be produced. LED high bay lights directly convert alternating current to direct current without flickering and fully protect the eyes.
6. No ultraviolet light: LED high bay lights will not emit ultraviolet light, and the color temperature is relatively mild. Unlike traditional lamps, the ultraviolet light is strong, and the light source will attract all kinds of insects. LED high bay lights will make your room more clean and hygienic.
7. Standard lamp: general standard lamp (E27, B22), which can directly replace the existing halogen lamp, incandescent lamp and fluorescent lamp.
8. Good color rendering: the color rendering index is as high as 90% or more, the luminous efficiency can be as high as 100lm/w, a variety of color temperatures are available, and the color rendering index and luminous efficiency are high.
9. Human body induction: to realize the light on when coming and off when going, and it is also more environmentally friendly.
10. All LED high bay lights have passed the aging test before leaving the factory to effectively prevent defective products from leaving the factory. We fully guarantee the highest quality sales.
The performance optimization design of LED high bay light products is suitable for large-scale places with high requirements on brightness. High brightness and good color rendering. Precision pure aluminum radiator, with brand chip power supply, has the characteristics of anti-light decay, pure light color and anti-flicker. It is more energy-efficient than traditional metal halide lamps, and presents the actual color more realistically, making the visual sense more comfortable. However, it is necessary to pay attention to many details during installation, which will not only extend the service life of LED high bay lights, but also save a lot of costs.
