The heat dissipation design and heat dissipation of LED high bay lights and the environment has always been a problem faced by all electronic products, which will affect the service life of the product. Why can't LED high bay lights reach the height of incandescent lamps? In addition to the high cost, there is also the problem of heat dissipation that cannot be really solved. The heat dissipation problem will greatly reduce the function of the lamp and cause premature light decay.

LED high bay lights will generate a lot of heat during use. If the heat dissipation is not done well, the heat will not be dissipated. The long working time will affect the components of each part and cause the service life of the lamp to be damaged. The LED high bay light market is currently not very standardized. Many LED high bay lights produced by manufacturers with insufficient strength have reduced various data, causing confusion in the entire industry market, and heat dissipation is a high-tech requirement. necessary.

What are the installation methods of LED high bay lights, and in which scenarios these installation methods are suitable for use, it must be understood. Reasonable and correct installation will bring good results.

Side wall installation: The side wall installation of LED high bay lights is mainly suitable for some light industrial plants. This kind of plant has relatively low height, light work content, and high contrast requirements. Fine lighting requires illumination requirements. The advantage of the installation method is to save energy and achieve the maximum lighting requirements with the least illuminance.

Suspended installation: The suspended installation of LED high bay lights is mainly suitable for the lighting of heavy machinery production workshops. This kind of workshop lighting has a very high plant height and requires a wide range of lighting, but the contrast requirement is not very high, so it is suitable for suspended installation .

Mobile: LED high bay lights are very special in mobile applications. This type of lamp is mainly used in outdoor factory and mine lighting environments. Because outdoor lighting, especially in some places with very harsh environments, electrical input is very difficult, and mobile LED high bay lights can make up for this shortcoming and meet the lighting needs of indoor environments.

LED high bay lights are available in various light colors, which can meet the needs of different environments, solve the depressed mood caused by the high or low color temperature of traditional lamps, and make the vision more comfortable, which greatly improves the work efficiency of workers and improves the work quality.

1. After the normal lighting has subsided due to the problem, the places that need to ensure the continuation of normal operations or activities should be equipped with lighting;

2. After the normal lighting has subsided due to faults, safety lighting should be installed in places that need to ensure the safety of personnel at risk;

3. When the normal lighting subsides due to the problem, the exits and passages that need to ensure the safety of personnel should be installed with scattered lighting;

4. Duty lighting should use a part of normal lighting that can be controlled independently or use a part or all of emergency lighting;

Fifth, the security lighting should be installed within the security scope according to the needs;

6. For obstructing the installation of lighting, the relevant regulations of the local area or transportation department should be strictly followed.

Wide applicable voltage (AC100V-240V) overcomes the power grid, noise pollution and light instability caused by the ballast, and avoids the impact and fatigue on the eyes during operation.

The power of LED high bay lights determines the brightness and power consumption. Since we use energy-saving and environmentally friendly lamps, we choose the most suitable one. That is: the power of the selected LED high bay light can just meet the brightness required for lighting. Therefore, we determine the lighting area, brightness requirements and the number of LED high bay lights needed before buying. Under normal circumstances, it is difficult to estimate what kind of choice is suitable for the client department. It is recommended that you consult our company before buying. Recommendation: Commercial lighting needs to buy LED high bay lights.

The quality of LED high bay lights is the most important consideration. In some places with relatively harsh space environment, the quality must meet the requirements in all aspects. If you buy a product of poor quality, the maintenance difficulty is completely unimaginable, which will lead to increased maintenance costs and various troublesome tasks in the later period.

Technical characteristics of LED high bay light:

1. Bionic fins for heat dissipation. The shape imitates the LED shape design, the shell is made of high thermal conductivity die-cast aluminum material, and the bionic fin convection integrated lamp body heat dissipation design is used, and the heat dissipation is also leveraged.

2. PC anti-ultraviolet ring aperture design for light transmission. Using PC material, it can withstand various temperatures. The anti-UV experiment ensures that the color does not change when used indoors and outdoors.

3. High light efficiency. The whole lighting effect is ≥130lm/W. The ring-shaped arrangement, branded lamp beads and drivers are optional to meet the needs of different customers.

4. Intelligent induction. Intelligent sensor module, the sensor module setting is turned on. When a person moves, the brightness is adjusted to 100%. The person walks the light for 30 minutes. After the person walks for 30 minutes, no object moves, the brightness of the light turns off. Intelligent dimming and microwave induction configuration are optional.

5. High protection. The IP65 protection level is suitable for use in high dust and high water vapor environments. The use of silicone rubber seals ensures that the product can be used in harsh environments such as high dust and water vapor.

6. Free choice of light distribution and installation. We have a variety of installation methods such as 60°, 90°, 120° light distribution angle, ring type, U-shaped bracket, etc. Different light distribution angles and installation methods can meet your needs.

The performance optimization design of Yaorong Technology LED high bay light products is suitable for large-scale places with relatively high requirements on brightness. High brightness and good color rendering. Precision pure aluminum radiator, with brand chip power supply, has the characteristics of anti-light decay, pure light color and anti-flicker. It is more energy-efficient than traditional metal halide lamps, and presents the actual color more realistically, making the visual sense more comfortable.