AREA LIGHT

AREA LIGHT

AREA LIGHT

How to reasonably standardize the installation spacing of solar street lights

How to reasonably standardize the installation spacing of solar street lights




When installing solar street lights, the operator must implement the fixed requirements. It is important to remind that the spare line is very important during installation. It is necessary to refer to the street light packaging to choose the appropriate sheath line. Select 2*1.5mm2, and determine the length of the sheath wire. The sheath wire of the solar cell module should have sufficient margin at the connection end of the solar cell module, and the other end must be connected to the bottom surface of the flange. The sheath wire of the light source should have sufficient margin at the connection end of the light source. The other end must be as long as the underside of the flange.

The height of the poles of solar street lights is generally determined according to the width of the road. The width of the pavement for new rural construction is generally about 5 meters, and the height of the poles can be 4-6 meters, which can determine the irradiation range of the solar street lights, preferably not lower than 15 meters. If it is a relatively wide two-way lane, the width is generally more than 10 meters, and a light pole with a height of 8 meters can be used.

   1: The installation spacing of 8 meters of solar street lights, if you install 8 meters of solar street lights on new rural roads, it is actually relatively few, most customers will choose to install 5-7 meters of solar street lights, and the installation distance is 10- 15 meters or so on it.

   2: The installation distance of 10 meters of solar street lights is generally 6-7 meters of solar street lights. When the road is 7 meters wide, if 10 meters of solar street lights are installed, the general distance should be kept at about 20-25 meters, especially in An extra solar street light should be installed at the corner, so as not to affect part of the lighting.

   3: The installation distance of solar street lights is 12 meters. The light poles must be hot-dip galvanized inside and outside, so that it will be safer. As for this installation spacing, the recommended spacing for 12-meter solar street lights is 30-50 meters, and the width needs to exceed 15 meters. The higher the light pole, the better the light source and the slightly higher configuration.


Recommended

wechat

WeChat contact us