What misunderstandings should be paid attention to in the installation of solar LED street lights?
The correct way to install solar street lights:
1. Solar LED street light installation location
The most important thing about the installation position of solar LED street lights is to receive the best light energy. At the installation site, first observe whether there are obstructions and obstacles around the foundation. There should be no trees, high-rise buildings and other obstacles that can affect the light. It is not allowed to install it in a backlit place.
2. The basic part of solar LED street light
The solar LED street light foundation must be operated in strict accordance with the construction drawings, and important data such as size and material must be mastered. The soil around the foundation should be low in humidity and high in strength to prevent unsafe behaviors such as tilting of the light pole by thrust. The location and smoothness of the threading hole of the solar street light foundation.
3. Solar LED street light power cord connection
The main concern is the firmness of the power cord connection and the tightness of the screws. When all wires are connected, they must be prevented from falling off and leaking, and the connection is tight and beautiful. In the process of tightening the screw, it is necessary to grasp the tightness, not too loose or too tight, according to the principle of tightening, and move in an appropriate amount.
4. Installation of solar LED street light poles
Before installing solar LED street light poles, be sure to check all power cords to see if there is any connection or leakage, and if so, correct it as soon as possible. Be sure to pay attention to safety when standing. During the process of tightening the ground screw, adjust the orientation of the light pole. Level up, don't lean back and forth. After all the work is done, the corner screws must be tightened again to keep it secure.
Misunderstanding of solar LED street light installation:
1. Install it in a place with many obstructions.
As mentioned above, the installation location is very important. Be sure to absorb enough light energy and convert it into electricity, so that the power can be supplied normally at night. If the street light is installed in a place with many obstructions, such as being blocked by many trees or buildings, it will not be used. It absorbs sunlight, so the light won't be bright or dim.
2. Install near other light sources.
Solar LED street lights have their own control system that can recognize dawn and darkness. If other power sources are installed next to the solar street lights, when the other power sources are on, the solar street light system will consider it as daytime and will not light up at this time.
3. Install lamps on both sides of the road, and the solar panels are inclined face to face.
It should be common to have lights on both sides of the road, but there is also the problem that the sun will only rise from the east. If the street light on one side faces east and the street light on the other side faces west, one side may be facing away from the sun and therefore cannot absorb sunlight because the direction is wrong. The correct installation method should be that the solar panels face the same, and the solar panels on both sides can absorb sunlight.
