What aspects should be paid attention to before installing LED garden lights?
Before the construction and installation of LED garden lights, check the materials again to see if there are any problems.
First: Material requirements: The equipment, equipment and materials used should comply with the current national technical standards, and should have a product quality certificate, and the equipment should have a famous brand.
Second: the LED garden light itself: 1. The accessories of the LED garden light should be complete, without mechanical damage, deformation, peeling paint, cracked lampshade and other phenomena. 2. The cross section of the lamp holder wire should not be less than: copper wire - 1.mm2; aluminum wire - 2.5mm2.
Third, the insulated wire: 1. There should be no defects such as twisting, dead bending, breaking and damage to the insulating layer. 2. The cross section of the down conductor should not be less than: copper wire - 1.5mm2; aluminum wire - 2.5mm2; the rated voltage should not be lower than 500V.
Fourth, the lamp holder and hoop of the LED garden light: 1. The surface should be smooth and free of defects such as cracks, burrs, flashes, trachoma, and air bubbles. 2. It should be hot-dip galvanized. In case of partial peeling of zinc skin, it should be painted with red camphor and paint after rust removal.
Fifth, the bolts used to install LED garden lights: 1. There should be no cracks, blisters, zinc peeling and corrosion on the surface of the bolts, and the bolts and nuts should be well matched. 2. Various connecting bolts on the metal should have anti-loosening devices, and the anti-loosening devices used should be well galvanized, with suitable elasticity and in compliance with the regulations. In addition, other materials, fuses, insulation binding wires, soft plastic pipes, rubber cloth, black tape, etc. should also be carefully checked.
Sixth, the main equipment required for the construction of LED garden lights: 1. Pulley, hand hammer, adjustable wrench, nylon rope. 2. Level ruler, tape measure, foot buckle, seat belt, high stool, etc.
Seventh, the working conditions of LED garden lights: 1. The production of the lamp frame has been completed. 2. The construction of the overhead line has been completed.
