- Jul 06, 2017 -
LED Floodlight is a point light that can be evenly illuminated in all directions, its irradiation range can be arbitrarily adjusted, in the scene is shown as a of the picture of the eight-body. Floodlight is in the production of the effect diagram should be
The standard floodlight is used to illuminate the whole scene with the widest source of light. Many floodlight can be used in the scene to produce better results. Floodlight is the most widely used light source in the effect diagram,
The scene can be used with multiple floodlights to coordinate the effect, LED Flood Light in order to achieve a better effect. It is the best way to illuminate an object in all directions from one particular point to another, using it to analogy bulbs and candles. Floodlight can be put
Placed anywhere in the scene. For example, it can be placed outside the camera range or inside an object. It is common to use many different colors of floodlight in the range of the scene. These floodlights may
With the shadows projected and mixed on the model. Because the illumination range of floodlight is relatively large, the illumination effect of floodlight is very easy to predict, LED Flood Light and this kind of light has many auxiliary uses, for example, the pan
Where the light is placed near the surface of the object, it produces a bright light on the surface of the object.
Low current, LED floodlight light temperature rise is not obvious. If the ambient temperature is higher, the main wavelength of LED floodlight will be red shifted, the brightness will drop, LED Flood Light the luminous uniformity, the consistency is worse. Especially the lattice, large display of temperature
The effect of rise on the reliability and stability of LED floodlight is more significant. So the thermal design is critical.
A floodlight is an evenly illuminated object in all directions from a particular point, and it is best to use it to analogy bulbs and candles. Floodlight can be placed anywhere in the scene. For example, can be placed in the camera
Outside the range, or inside the object. It is common to use many different colors of floodlight in the distance of the scene. These floodlights can cast shadows and mix them on the model. Because of the light
The illumination of the floodlight is very easy to predict, LED Flood Light and the light has many auxiliary uses, such as placing the floodlight near the surface of the object.
Bright light on the surface.
At present, commonly used in the market led projection lamp is the selection of 1W high-power led (each LED element will have a high light lens made of PMMA, its main function is two times to allocate the light emitted by the LED, also
is two optical), there are a few companies because of heat treatment technology, and chose 3W or even higher power led. Suitable for large-scale lighting, buildings and other lighting.
LED floodlight is mainly used for building decorative lighting, as well as commercial space lighting, decorative components heavier, the outside type has a round also good, because the general need to consider the reasons for the heat, so its
There are some differences between the shape and the traditional light bulb.
LED Floodlight is actually a LED lamp cup. LED Flood Light He has some characteristics of his own.
1, high purity aluminum reflector, the most accurate beam, the best reflection effect.
2. Symmetric narrow angle, wide angle and asymmetric light distribution system.
3, the back-open replacement of light bulbs, maintenance is simple.
4. The luminaire is equipped with a scale board for adjusting the illumination angle.
Applicable scope: Apply to the railway, electric power, metallurgy, LED Flood Light petrochemical and all kinds of plant, workshop, site and large facilities, venues and other places for floodlight lighting.
Performance characteristics:
Patented design of the hexagonal 45-degree angle unique light, light-shaped spot evenly without glare, irradiation angle, light distribution uniform soft; the use of the international top brand original LED light source, low energy consumption, high light efficiency, power consumption
The amount is only 20% of the same luminous flux incandescent lamp. Fully embodies the concept of energy conservation and environmental protection, multiple protection function of the power design, effectively improve the LED luminous efficiency.
The shell uses the aluminum alloy material and the newest surface treatment technology, the abrasion resistance is rotten, the waterproof dustproof, LED Flood Light the lamp inside and outside has the air diversion structure the cooling shroud causes the LED full heat dissipation, lengthens the light source service life.
Multi-channel shockproof structure and integrated design ensure its long-term safety in high frequency and multi-frequency vibration environment.
Light source components, light distribution components, high-quality power supply and so on are used in modular design and assembly, can be easily replaced, reduce the cost of maintenance later; transparent glass with high boron-silicon pressure to be treated by tempering, can be effective
Resist 4J impact.
One-piece lighting structure, small size, light weight, direct introduction of cable, installation wiring simple and convenient, the use of ceiling type, wall-mounted, guardrail type, such as a variety of installation.
