In terms of growing indoor plants, LED grow lights are becoming more and more popular. Now indoor growers will choose to use LED grow lights to fill light, can grow any plant and use it in any indoor place. But many people will say that there is no effect or the effect is not obvious when they use it. How to improve the efficiency of indoor planting of LED grow lights? If you want to use LED grow lights to be effective, you must pay attention to many aspects when using them.

After a long period of development, plant lights, from incandescent lamps, high-pressure sodium lamps, HID lamps, halogen lamps, LED grow lamps, etc., different lamps have their own characteristics. Incandescent lamps have high heat and lack the red and blue light needed by plants for photosynthesis; fluorescent growth lamps have low output, are too large and bulky to perform well, and lack red light, so they are used as seeds or seedlings Growth light; HID lamps are highly efficient, but the price is also very high, and lack of blue light required for photosynthesis of plants, so it is not the best choice to supplement light for plants, only LED grow light is the most suitable light for indoor planting.

Practical functions of LED grow lights:

1. Use LED grow lights to illuminate plants: extend the light time, increase the light intensity, and reduce the growth cycle of plants;

2. LED grow lights can effectively prevent overgrowth of plants and grow more orderly;

3. LED grow lights can increase crop yields and economic benefits;

4. LED grow lights can effectively prevent the invasion of pests;

5. LED grow lights promote flowering and fruiting of melon and fruit plants and reduce the formation of deformed fruits;

6. LED grow lights can completely replace sunlight, and plants can thrive when planting plants in winter;

7. LED grow lights can effectively promote the formation of chlorophyll, anthocyanin and carotene required for plant photosynthesis;

8. LED grow lights can be used for aerospace plant systems and aerospace planting;

9. LED grow lights can be used in a wide range of environments, such as large-scale planting, multi-layer tissue culture, local lighting, home bonsai, etc.

LED grow light application advantages:

1. The LED grow light can be well used in tissue culture and can be used for close-range lighting, especially with LED plant light strips;

2. The wavelength of the LED grow light can be customized, which can replace 3-5 times the power of high-pressure sodium lamps, halogen lamps, and fluorescent lamps, saving power by 80%;

3. The LED grow light has a long life span, up to 50,000 hours;

4. LED grow lights can be freely matched with the ratio of lamp beads to meet the needs of different plants and different growth stages;

5. The use of led plant growth lights can control the growth rate of plants and predict the maturity time of the market;

6. LED grow light is a kind of energy-saving, environmentally friendly and efficient plant growth light.

7. The heat emitted by LED grow lights is much lower than that of traditional plant growth lights.

8. LED grow lights respond faster than traditional plant growth lights;

9. LED grow lights are stronger than traditional plant growth lights and have stronger impact resistance.

Which aspects to choose LED grow lights

LED grow light manufacturers

1. Whether the manufacturer is a physical manufacturer, and whether it can guarantee the quality and service of LED grow lights

2. Does the manufacturer have the ability to develop spectrum, and can they provide matching cannabis spectrum formulas and supplementary light solutions.

3. Pay attention to the quality of the manufacturer's LED grow light, whether the power is sufficient, whether the spectrum is in line, whether there is heat dissipation equipment, etc.

LED grow light spectrum

Through repeated experiments and comparisons, large companies have come up with a very effective lamp bead ratio for cannabis cultivation-Osram's red (660nm) and Samsung's high-efficiency white (301B). Gradually, such a spectrum scheme is accepted in the market. However, this solution may only have a significant effect on a certain growth stage of cannabis. Now the technology of LED grow lights is constantly improving. For the spectrum, researchers have developed a full spectrum that satisfies each growth stage of cannabis, and can be adjusted and satisfied. The spectra required in different stages give hemp an excellent growth state.

LED grow light power

Because hemp plant is a kind of light-loving crop, it requires high light intensity and luminous flux when supplementing light. The LED grow light has the characteristics of high lumen and high luminous efficiency, which satisfies the light supplementation of cannabis plant planting. Demand, then cannabis growers should try their best to choose high-power LED grow lights when choosing LED cannabis plant lights, so as to give hemp a better growth conditions.

LED grow light is waterproof and heat dissipation

If cannabis is grown in greenhouses, greenhouses and other indoor environments that require watering, then the LED cannabis grow lights must reach the IP65 waterproof level. Because the heat generated by the high-power LED grow lights will be more correct, it is also a greenhouse, a greenhouse. This kind of indoor environment is likely to cause poor air circulation and poor heat dissipation, and the growth of marijuana is related to the carbon dioxide content in the air, so keep the air circulating.

LED grow lights are energy-saving and environmentally friendly

The electro-optical conversion rate of LED grow lights is relatively high, and relatively low power consumption, and the service life is as high as 50,000 hours. The raw materials of LED grow lights can also be recycled to reduce pollution, and will not emit infrared rays and other spectrum that affect ecological balance, and will not contain harmful substances like traditional plant lights, which will cause pollution.

LED grow light red and blue lamp beads ratio layout

All the plans of LED grow lights must be customized around plants. What kind of shape the grows need to grow into is cultivated according to the needs of people. Therefore, when looking at the ratio of red and blue beads of LED grow lights, the plant must be considered first. Growth needs and human needs.

But from the perspective of light, whether it is the demand for plant growth or human demand for plants, the control methods include control of light quality, control of light intensity, and control of light time. Only in this way can the light intensity reach the point required by the plant, and the light time can reach a certain length of time, giving the plant a better growth state.

When LED grow lights are used to supplement light to plants, the source of most of the light for plant photosynthesis is LED grow lights. The different light qualities of LED grow lights have different physiological meanings to plants. LED grow lamp lamp beads chips are mainly red lamp beads, blue lamp beads, and full-spectrum lamp beads. The main function of red light on plants is to adjust the photoperiod of plants, and the main function of blue light is to affect the movement of leaves and plastids, to a certain extent Inhibit the flowering and fruiting of plants; the main band of full-spectrum lamp beads is also the red and blue spectrum.

It can be seen from the effect of red and blue light that when choosing the ratio of red and blue LED grow lights, you must first determine what plants to plant and what growth form they achieve. For example: lettuce planting, lettuce is mainly stems and leaves, so it is necessary to choose blue light that stimulates the quality and yield of stems and leaves, then the proportion of blue light bulbs of LED grow lights can be increased appropriately; another example: tomato planting, our purpose is to eat and Large, round, healthy and green high-quality tomatoes, that is, the purpose of stimulating their flowering and fruiting during the planting process, at this time the ratio of red lamp beads for LED grow lights can be increased appropriately.

Since the main function of red light is to promote the flowering and fruiting of plants, and the main function of blue light is to promote the growth of plant stems and leaves, then we can choose monochromatic light for some plants. Wouldn’t it be better, but the photosynthesis process is extremely complicated, with light response and darkness. Each step of the reaction has the direct and indirect participation of light, and each of these steps determines the final morphogenesis of the plant.

Yaorong Technology is one of the few companies in China that specializes in high-end LED grow lighting products. It can independently develop and customize a variety of LED grow lights to give the spectrum needed for growth. The styles of LED grow lights are also relatively new. From the beginning of 2010 to the present, 11 years of precipitation is enough to ensure the quality of the products.