Cannabis cultivation

Cannabis cultivation

Cannabis cultivation

Choose the best industrial hemp LED plant lights

Choose the best industrial hemp LED plant lights 




LED grow lights are now powerful enough and have sufficient spectrum, and are considered to be the ideal choice for cannabis grow lights. Using the correct umols and PAR values, LED grow lights will provide larger and thicker results than HID or high pressure sodium lights.


Why LED plant lights are the obvious choice when growing hemp, industrial hemp, etc.


Light is essential for the growth of plants. For photosynthesis in plants, light must exist. Advances in technology provide an alternative to sunlight to help crop growth. If you plan to grow indoor plants, or if you live in an area with insufficient sunlight, you can use a grow light.


Purchasing LED plant lights


LED grow lights have been proven to be the best choice for indoor plant growth. Since they are the first choice of many growers, there are many options on the market. Pay attention when buying LED grow lights.


When setting up an indoor garden, you need to make sure your plants are healthy and productive. One way to ensure that this happens is to buy the right LED grow lights. This can be a daunting task, especially if you have never bought an LED grow light in the past.


Be careful when buying grow lights. Buying LED plant growth lights will be a high initial investment. Although the initial cost may be high, they will provide you with efficiency and longevity, which can offset the high cost in the long run.


LED chip


You always want to look for a chip with at least 3W. Any chip smaller than 3W can't provide enough consistent light coverage for your plants. This means that each chip needs to be 3W instead of 3 lights of 1W LED, so please pay attention to this when reading the instructions. The 3W chip provides the best quality with white light, blue light and red light.


power


This is also important; you want to read the product description to get the total output. How many units does the lamp claim? It can be 300W, 400, 600 or even 1000. Always check the output and look for at least 300W.


When it comes to LEDs, you can't always get 100% power, so the final wattage is usually less than the recommended, and regardless of the quality, the chip will always burn out, so the higher the wattage you It can also compensate for wattage loss.


spectrum


Remember, red, blue and infrared are also important when growing industrial hemp, so you have to stick to the ideal PAR value. Look for blues in the range of 440-470nm, and the tearing range is between 640 and 660nm.


Heat dissipation


These lights stay on most of the day, usually 15 hours at a time, so you want to make sure they have an internal fan to protect the lights and a fan to protect the plants. If it is too hot there, it may damage the plants.


LED lamps operate at a lower temperature than HPS bulbs because they only emit about 15% to 25% of their energy as heat, but the heat occurs behind the LEDS bulb, so this area needs to be protected. High-quality lights will have a thick aluminum heat sink on the outer or inner area of the rear to remove heat from the chip.


lens


High-quality lamps will have an optical lens that can magnify the light and increase the nutrient permeability of plants by about 25%. This makes the lamp more expensive, but it is definitely worth having.


Materials


The LED should have a warranty, preferably one of 5 to 10 years. In fact, the service life of LEDs of this nature is about 10 years, especially in some more expensive panels. Look for panels made of aluminum, steel, or materials that are not easily broken.


Warranty


As mentioned earlier, looking for a lamp with a warranty of more than one year, the LED has a lifespan of up to 10 years, so I am a little skeptical about manufacturers who only provide a one-year warranty, because this shows that the manufacturing cost of the housing or cable system is low. I usually expect a 5-year warranty on the parts.


But the parts guarantee will be better, because no matter which part needs to be replaced, the bulb will continue to work. You can easily replace it yourself when the missing part arrives, while your plants can still get the nutrients they need.


Recommended

wechat

WeChat contact us